New Items

Industrial grade Unmanaged Ethernet Switch have low power consumption. The fanless design prevents it from noise interference.
The operating temperature range is from -40 to 85 DegC and together with EMC compatibility,
it makes the switch works stable under poor environment which provides safe and reliable solution for all industrial automation needs.

Cellular modem is a multi-functional, ready to use, rugged unit that can be embedded or plugged into any application. The modem can be controlled and customized to various levels by using the standard AT commands. The modem is fully type-approved, it can speed up the operational time with full range of Voice, Data, Fax and Short Messages.

Other Details

• USSD, 0710 MUX protocol embedded TCP/UDP protocol
• PPP Stack, FTP/HTTP, Non Transparent mode MMS, SMS support 

Industrial grade Unmanaged Ethernet Switch have low power consumption. The fanless design prevents it from noise interference.
The operating temperature range is from -40 to 85 DegC and together with EMC compatibility,
it makes the switch works stable under poor environment which provides safe and reliable solution for all industrial automation needs.

This Rack-mount Industrial switches, designed for Industrial applications such as Traffic control, Power network system, Wind power, Solar applications etc.
It provides safe and reliable solution for Industrial automation, intelligent transportation, Video transmission, and other Industrial application networking access.
The operating temperature range is from -40 to 85 DegC and together with EMC compatibility,
it makes the switch works stable under poor environment which provides safe and reliable solution for all industrial automation needs

10/100/1000Base-TX with POE to 1000Base-FXThe SC12FPIAG series is Industrial Gigabit POE Media Converter. It is the ideal solution for powering remote devices such as IP phones, video cameras, wireless access points, etc.In addition to transmitting data, the twisted-pair injects power down the cable, allowing a remote Power over Ethernet Device to operate without the need of any additional power source. SC12FPIAG Power over Ethernet Powered Device is IEEE 802. 3af/at complaint.

PoE injector is PoE power supply module. There are 2 x RJ45 PoE ports one of which is the Ethernet In Port for the uplink of upper switches or other upper network devices, and another is PoE Out port used as the port for network data and power output.These PoE injectors provide a simple, economical, high-performance and intelligent way for Ethernet PoE power supply and data communication. They can supply power to HD webcam through Cat5 Ethernet cable.

It has 4 Protection methods :Gas discharge tube, Voltage Dependent Resistor, Transient Voltage Suppressors, Electro-Static Discharge, Differential Mode Surge Voltage (L-L,8/20us) : 4KV, Breakdown Voltage (4,5-7,8) & (3,6-1,2) : 90-180VDC, Common Mode Surge Voltage (L-E, 8/20us) : 6KVBreakdown Voltage (8 lines-earth) : 70 120VDC, Operating Current : 1.36AMax Surge Current : 20KA There are 2 x RJ45 PoE ports one of which is the Ethernet In Port for the uplink of upper switches or other upper network devices, and another is PoE Out port used as the port for network data and power output.These PoE injectors provide a simple, economical, high-performance and intelligent way for Ethernet PoE power supply and data communication. They can supply power to HD webcam through Cat5 Ethernet cable.

It convert RS232 devices to RS485 and vica versa. The Input RS232 Serial port is RJ45 instead of DB9. SC04U is a Bi directional RS232 to RS485 Converter.  These converters are used for running RS232 signals to long distance (1.2km). This converter can also facilitate multiple field devices to be multidropped on the RS485 and allow their connectivity to a RS232 device.

10/100/1000 Base-TX  Ethernet to 1000 FX fiber Converter. It has an added benefit of auto-negotiation, making it the perfect choice when planning future upgrades of 10/100 Base-T networks. Built-in auto-sensing capabilities enable full or half-duplex Ethernet operation with no configuration required.

10/100/1000 TX Ethernet to 1000 FX  fiber Converter. Model SC09FENGI provides a cost-effective plug-and-play solution for long-range GigaEthernet extensions. It is a perfect choice when planning future upgrades of Ethernet networks. Built-in auto-sensing capabilities enable full or half-duplex Ethernet operation with no configuration required.

SC11U4K allows you to connect your Serial devices to a USB Interface. With data format auto detecting and baud rate auto switching function, SC11U4K is able to automatically detect the data flow and switch the direction of the data lines as well as to automatically configure RS422/485 signals to any baud rate without external switch setting. Equipped with 3000VDC of isolation and internal surge-protection on each data line, SC11U4K gives the host computer and module, protection from destructive voltage spikes and danger of unregulated voltages input. SC11U4K also features a high-speed 115.2 Kb/s transmission rate and supports various O.S. with USB Cable of Type B. It does not need any external power supply.

Other Details:

This Rack-mount Industrial switches, designed for Industrial applications such as Traffic control, Power network system, Wind power, Solar applications etc.
It provides safe and reliable solution for Industrial automation, intelligent transportation, Video transmission, and other Industrial application networking access.
The operating temperature range is from -40 to 85 DegC and together with EMC compatibility,
it makes the switch works stable under poor environment which provides safe and reliable solution for all industrial automation needs

This Rack-mount Industrial POE switches, designed for Industrial applications such as Traffic control, Power network system, Wind power, Solar applications etc.
This are IEEE 802.3af/at Compliant switches.
It provides safe and reliable solution for Industrial automation, intelligent transportation, Video transmission, and other Industrial application networking access.
The operating temperature range is from -40 to 85 DegC and together with EMC compatibility,
it makes the switch works stable under poor environment which provides safe and reliable solution for all industrial automation needs.

This Rack-mount Industrial POE switches, designed for Industrial applications such as Traffic control, Power network system, Wind power, Solar applications etc.
This are IEEE 802.3af/at Compliant switches.
It provides safe and reliable solution for Industrial automation, intelligent transportation, Video transmission, and other Industrial application networking access.
The operating temperature range is from -40 to 85 DegC and together with EMC compatibility,
it makes the switch works stable under poor environment which provides safe and reliable solution for all industrial automation needs.

Industrial grade Managed POE Ethernet Switch are ideal solution for powering remote devices such as IP phones, video cameras, wireless access points, etc.
This are IEEE 802.3af/at Compliant switches.
The operating temperature range is from -40 to 85 DegC and together with EMC compatibility,
it makes the switch works stable under poor environment which provides safe and reliable solution for all industrial automation needs.

Industrial grade Managed POE Ethernet Switch are ideal solution for powering remote devices such as IP phones, video cameras, wireless access points, etc.
This are IEEE 802.3af/at Compliant switches.
The operating temperature range is from -40 to 85 DegC and together with EMC compatibility,
it makes the switch works stable under poor environment which provides safe and reliable solution for all industrial automation needs.

The Multi-port Industrial Serial Server SC10EXXAM series is a gateway between ModbusASCII/RTU to ModbusTCP Communications. It allows almost any Modbus RTU device to aLAN network by encapsulating serial data and transporting it over Ethernet. SC10EXXAM SSeries offers full-duplex, bi-directional data transmission between Serial port and Ethernetnetwork. SC10EXXAM S Series supports OpenVPN and IPsec, which allows you to securelycommunicate through the internet.Flexible configuration options enable this unit to be setup by Telnet, Web browser, SerialConsole, or other Windows utilities. Packed in a rugged metal housing with 19-inch Rackmount and AC / DC power input, SC10EXXAM is ideal for almost any industrial andmanufacturing automation.

Industrial grade 10/100/1000Base-TX to 1000Base-X SFP unmanaged standalone media converter. It enables you to mix legacy twisted-pair to a fiber-optic backbone and optimize total cost of ownership allowing trouble free & robust process of Data conversion Both Multi-mode and Single-mode Fiber options are available. With Auto-Negotiation function, these units will automatically tailor themselves to convert both Half or Full duplex Ethernet signals, depending on your specific network needs.

Industrial grade 10/100/1000Base-TX to 1000Base-FX unmanaged standalone media converter. It enables you to mix legacy twisted-pair to a fiber-optic backbone and optimize total cost of ownership allowing trouble free & robust process of Data conversion Both Multi-mode and Single-mode Fiber options are available. With Auto-Negotiation function, these units will automatically tailor themselves to convert both Half or Full duplex Ethernet signals, depending on your specific network needs.

Industrial grade 10/100Base-TX to 100Base-FX unmanaged standalone media converter. It enables you to mix legacy twisted-pair to a fiber-optic backbone and optimize total cost of ownership allowing trouble free & robust process of Data conversion Both Multi-mode and Single-mode Fiber options are available. With Auto-Negotiation function, these units will automatically tailor themselves to convert both Half or Full duplex Ethernet signals, depending on your specific network needs.

Industrial grade Managed POE Ethernet Switch are ideal solution for powering remote devices such as IP phones, video cameras, wireless access points, etc. This are IEEE 802.3af/at Compliant switches.
The operating temperature range is from -40 to 85 DegC and together with EMC compatibility,
it makes the switch works stable under poor environment which provides safe and reliable solution for all industrial automation needs.

It is a 2G/4G based embedded Quick SMS alert System for field inputs with multiple Analog / Digital Input & Digital Output catering to various applications such as, Remote Monitoring, Remote Diagnostic and Predictive maintenance.

This is a 4 port RS232/422/485 to 2 ports LAN redundant device server. To assure the agility and security of critical data, it offers many powerful features for HW & SW redundant functions. When the connection between master-link and LAN fails, it can automatically switch to another LAN port within 10mS, and still guarantees a non-stop connection. It also supports Switch mode, users can use Daisy Chain to reduce the usage of Ethernet switch ports. It can simultaneously transfer data into 5 host PCs. This feature can assure all critical data that saved in different host PC to avoid Ethernet break or host PCs failure.

Technical Details:

SP PR10G is a PoE surge protector, with 1 input port and 1 output port, support 8 lines network signals and PoE Surge protection. It is designed to handle differential mode surge voltage (8/20us) 4KV and Common mode surge voltage (8/20us) 6KV, and  support 100/1000Mbps. It is compliant with IEEE802.3af/at/PoE++ standard and protects PoE switch and Midspan devices effectively against surge damage. SP PoE PR10G is designed for indoor use.

SC10MK2G is a 2 port Modbus RTU to Modbus TCP andWiFi. SC10MK2G allows up to 8 Modbus/TCP masters andwith 32 simultaneous requests per Master, to get the pollingdata via the Ethernet and Wi-Fi (optional). It provides abuilt-in web server to configure each Modbus command.502 Port no’s can be assigned to both the Serial portsSC10MK2 G also supports IP + MAC Bindings

It is a 2 Serial Port Modbus RTU to Modbus TCP protocol converter. High-end CPU makes it an idle choice for applications like Meter readings, Solar controls & any other protocol conversion applications. It has Dual Power Input with an additional option of PoE Power.

• Item Code: SC10MK-2

The Multi-port Industrial Serial Server SC10EXXA Series is a gateway between Ethernet (TCP/IP) and RS232/422/485 communications. It allows almost any serial device to a LAN. network by encapsulating serial data and transporting it over Ethernet. SC10EXXA offers full- duplex, bi-directional data transmission transparent between Serial port and Ethernet network.SC10EXXA S Series supports OpenVPN and IPsec, which allows you to securelycommunicate through the internet.Flexible configuration options enable this unit to be setup by Telnet, Web browser, SerialConsole or Windows utilities. Packed in a rugged metal housing with 19-inch rack mount and 100~240VAC wide power input range, SC10EXXA is ideal for almost any industrial and manufacturing automation.

It is a 2 port Serial to Ethernet + WiFi Converter. It supports 2 Serial Ports, a Fast Ethernet port & WiFi.

Model SC10MK is programmable, Web-enabled Modbus RTU to
Modbus TCP protocol converter. High-end CPU along with Linux OS makes it an idle choice for applications like Meter readings, Solar controls & any other protocol conversion applications.

It is a programmable Modbus RTU to Modbus TCP protocol converter. High-end CPU along with Linux OS makes it an idle choice for applications like Meter readings, Solar controls & any other protocol conversion applications.

It is a programmable Modbus RTU to Modbus TCP protocol converter. High-end CPU along with Linux OS makes it an idle choice for applications like Meter readings, Solar controls & any other protocol conversion applications.

The Multi-port Industrial Serial Server SC10EXXA Series is a gateway between Ethernet (TCP/IP) and RS232/422/485 communications. It allows almost any serial device to a LAN. network by encapsulating serial data and transporting it over Ethernet. SC10EXXA offers full- duplex, bi-directional data transmission transparent between Serial port and Ethernet network.SC10EXXA S Series supports OpenVPN and IPsec, which allows you to securelycommunicate through the internet.Flexible configuration options enable this unit to be setup by Telnet, Web browser, SerialConsole or Windows utilities. Packed in a rugged metal housing with 19-inch rack mount and 100~240VAC wide power input range, SC10EXXA is ideal for almost any industrial and manufacturing automation.

It is a programmable Modbus RTU to Modbus TCP protocol converter. High-end CPU along with Linux OS makes it an idle choice for applications like Meter readings, Solar controls & any other protocol conversion applications.

Serial to Ethernet converters, allowing access ofSerial (remote) devices like Access Controllers, Fire Alarm panels, Industrial Automation products etc to be connected on LAN or to allow Ethernet connectivity to your legacy serial device. You can convert 4 Serial ports to Ethernet on a single IP.

Serial to Ethernet converters, allowing access ofSerial (remote) devices like Access Controllers, Fire Alarm panels, Industrial Automation products etc to be connected on LAN or to allow Ethernet connectivity to your legacy serial device. You can convert 4 Serial ports to Ethernet on a single IP.

RS232/RS485/RS422 to Fiber Optic Converter, SC09FS series of converters are an ideal choice for connecting devices situated in environments where electromagnetic & radio frequency is a major concern. They economically & efficiently extend the Serial port over a distance up to 2Km over Multi-mode fiber or up to 20Km over Single-mode fiber. The converter is equipped with multiple interface circuit such as RS232, RS422, RS485 (2 or 4 wire). It secures data transmission at speeds up to 115.2kbps for RS232, or up to 500Kbps for RS422 / 485.

GW IoT is a cellular gateway used for remote monitoring of multiple field equipments via 2G/4G network. It acts as a Modbus master to multiple Modbus slave field devices at a single location and provides reliable data connection to aweb-based application server. The web server application can be hosted on public network or can be installed at central monitoring station having Static IP. It is designed to be used in industrial panels.

GW IoT Cellular IoT Gateway with IO’s and is used for remote monitoring of Analog/ Digital inputs via 2G/4G network. It can also act as a Modbus master for multiple slave field devices and provides reliable data connection to a web basedapplication server. The web server application can be hosted on public network or can be installed at central monitoring station having static IP.

Analog Input to RS485 (Modbus RTU) Converter, Support Analog Devices to Modbus Router Networks.
Support 4 Analog Inputs
S40 – 4~20 mA x 2 + 0~10V x 2 Inputs
S40 A – 4~20 mA x 4 Inputs
S40 A – 4~20 mA x 4 Inputs
Port Type : RS-485 x 1 Port
Connector: 2-pin Terminal Block
Speed: 300 bps ~ 115.2 Kbps

Industrial grade Unmanaged Ethernet Switch have low power consumption. The fanless design prevents it from noise interference.
The operating temperature range is from -40 to 85 DegC and together with EMC compatibility,
it makes the switch works stable under poor environment which provides safe and reliable solution for all industrial automation needs.

GW IoT EM is a gateway used for remote monitoring of multiple field equipment via Ethernet WAN and WiFi network. It acts as a Modbus master to multiple Modbus slave field devices at a single location on serial and provides reliable data connection to a web based application server. The web server application can be hosted on public network or can be installed at central monitoring station having Static IP.

GW IoT Cellular gateway with IO’s is used for remote monitoring of Analog /Digital inputs via 2G/4G network. It can also act as a Modbus master for multiple slave field devices and provides reliable data connection to a web basedapplication server. The web server application can be hosted on public network or can be installed at central monitoring station having static IP.

20 Channel AI/DI/DO to RS485 (Modbus RTU) Converter. RIO884 is used to monitor field inputs and control outputs through Modbus.interface. It acts as a Modbus RTU slave and updates status of analog and digital. inputs in predefined Modbus registers. Digital outputs of RIO884 can be controlledthrough Modbus registers. It is designed to be used in Industrial panels and operates on 24V DC power supply.

7 Channel AI/DI/DO to RS485 (Modbus RTU) Converter. RIO241 is used to monitor field inputs and control outputs through Modbus.interface. It acts as a Modbus RTU slave and updates status of analog and digital. inputs in predefined Modbus registers. Digital outputs of RIO241 can be controlledthrough Modbus registers. It is designed to be used in Industrial panels and operates on 24V DC power supply.

Dual Port-Bacnet MSTP, Backnet IP, MODBUS RTU, MODBUS TCP, MetasysN2 Converter.

Small Form Factor Pluggable transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The SFP transceivers are high performancecost effective modules supporting dual data-rate of 155Mbps and 20km and higher transmission distance with SMF. They are RoHS compliant and lead-free

Small Form Factor Pluggable transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The SFP transceivers are high performancecost effective modules supporting dual data-rate of 1.25Gbps/1.063Gbps and 20km and higher transmission distance with SMF. They are RoHS compliant and lead-free

Small Form Factor Pluggable transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The SFP transceivers are high performancecost effective modules supporting dual data-rate of 1.25Gbps/1.063Gbps and 20km and higher transmission distance with SMF. They are RoHS compliant and lead-free

LoRa devices SC15L, SC15L241 and Access Point SC15L APS are ideal for Machine monitoring and sending Sensor data using LoRa wireless technology over long range. SC15L LoRa transmitters connect transparently to the SC15L APS Access Point. SC15L241 sends IO data or field Modbus slave devices data to the SC15L APS, which gives output in Modbus RTU interface for monitoring. SC15L APS is used in 3 modes viz. Packet, Transparent and Modbus RTU Slave depending on application requirement

M2M GATEWAY is an intelligent cellular router designed for industrial applications requiring faultless connectivity. It provides a secure, reliable, real-time, remote connectivity for SCADA, distribution management systems, metering etc. Software-defined, multi-carrier networking, dual SIM models,802.11n and global 2.5G/3G/HSPA+/LTE options make it easy to get connected.