Brand | San Telequip |
Model Name/Number | SC07 |
Speed | 1200 bps to 115 Kbps |
Connector Type | Screw Terminals |
Optical Isolation | 3000 V DC |
Galvanic Isolation | 3000 V DC |
ESD Protection | 15 KV on all Data Lines |
Power | 1.2 W |
Surge Protection | 600 W on all Data Lines |
Cable Distance | 1200 m (on both side) |
Cable Impedance | 90 ohm/km |
LED Indications | TX, RX & Power ON |
Operating Temperature | 0 to 65 Degrees C |
Humidity | 5 to 95 % RH (non condensing) |
Dimensions | 45 mm x 110 mm x 75 mm |
Enclosure | ABS Din Rail Mounting |
Brand | San Telequip |
Model | SP485 |
Connector Type | Screw type Terminal Strip |
DC Spark Over Voltage | 72 to 102 V DC |
Operating Temperature | 55 deg C (Normal), 65 deg C (Maximum) |
Enclosure | MS Powder Coated |
Mounting | DIN rail |
Dimensions | 85 x 69 x 21 mm |
Brand | San Telequip |
Model | SP485-S |
Input Output Type | 2 Wire (RS485) |
Input Connector | 3 Pin Screw Type Terminal Block |
Output Connector | 2 Pin Screw Type Terminal Block |
Transient Voltage Suppression | 600 W |
DC Spark Over Voltage | 72 to 102 V DC |
Operating Temperature | 55 deg C (Normal), 65 deg C (Maximum) |
Enclosure | MS Powder Coated |
Dimensions | 33 x 21 x 65 mm |
Mounting Type | DIN Rail |
Brand | San Telequip |
Model | SC10SP |
Surge Protection | 600 W |
DC Spark Over Voltage | 90 V, +/- 25% |
Glow Voltage | 200 V |
Response Time | 1 ns |
Operating Voltage | Up to 5V DC |
Output Current | 10 A (Max 10 KA) |
Technical Details:
Operating Temperature | 0 to 50 Degrees C |
Storage Temperature | -20 to +70 Degrees C |
Humidity | 5 to 90 % RH (non condensing) |
Dimensions | 9.5 x 2.5 x 2.2 cm |
Mounting Type | DIN Rail |
Weight | 100 gm (approx) |
Brand | San Telequip |
Model | SMI |
Power Consumption | 1.2 W |
Power Supply | 90 to 270 V SMPS, Optionally 24V DC |
Optical Isolation | 3000 V DC |
Speed | 1200 bps to 115 Kbps |
Galvanic Isolation | 3000 V DC |
ESD Isolation | 15 KV min. on all Data Lines |
Indication LEDs | TX, RX & Power ON |
Input Connector | DB9 Female |
Output Connector | DB9 Male |
Power Connector | 3 Pin screw type Terminals |
Dimensions | 75 mm x 110 mm x 45 mm |