GSM GPRS Modems & Smart Alert Gateways

Cellular modem is a multi-functional, ready to use, rugged unit that can be embedded or plugged into any application. The modem can be controlled and customized to various levels by using the standard AT commands. The modem is fully type-approved, it can speed up the operational time with full range of Voice, Data, Fax and Short Messages.

Features

• USSD, 0710 MUX protocol embedded TCP/UDP protocol
• PPP Stack, FTP/HTTP, Non Transparent mode MMS, SMS support
• Output power < 35 dBm
• Sensitivity < -110 dBm
• Control via AT commands (GSM 07.07 and 07.05)
• GPRS multi-slot Class 12/10/8
• Complaint to GSM phase 2/2+
• Coding Scheme: CS1 to CS4
• CSD up to 14.4 kbps
• Plug & Play design with easy to use interface

It is used for automatic communication between multiple field devices using 2G/4G enabled SIM cards. These units can communicate to each other through centrally hosted MQTT broker. MQTT broker is hosted on cloud orstatic IP. Thus, these units establish a transparent data link for any external Field devices such as PLC and RTU

Remote Monitoring, Remote Diagnostic and Predictive maintenance is the need of the hour. System upkeep time is vastly improved if the key decision makers are immediately alerted on failures occurring in a system. Change in process conditions like increase or drop in Temperature, Pressure, Flow etc or a Solenoid valve / circuit breaker trip or a forced entry in your house can be alerted via SMS SAN designed a 2G/4G based embedded Alert system with multiple Analog / Digital Input & Digital Output catering to various applications.

Features

• Quick SMS alerts from field inputs
• Allows upto 4 Digital potential free inputs with common ground pin
• Supports upto 2 potential free outputs to be controlled via SMS
• For every input, unique SMS and prerecorded voice message can be sent to reporting numbers
• 10 numbers for SMS reporting and 10 separate numbers for voice reporting can be configured
• Voice reporting numbers can be landline or mobile numbers
• 16 seconds voice message recording for each input
• Voice message recording through mobile phone call
• Periodic update of Digital inputs status as Normal or Alarm via SMS
• Buzzer for audible status
• Configuration via preformatted SMS 

Remote Monitoring, Remote Diagnostic and Predictive maintenance is the need of the hour. System upkeep time is vastly improved if the key decision makers are immediately alerted on failures occurring in a system. Change in process conditions like increase or drop in Temperature, Pressure, Flow etc or a Solenoid valve / circuit breaker trip or a forced entry in your house can be immediately alerted via SMS SAN designed a GPRS based embedded Alert system with multiple Analog / Digital Input & Digital Output catering to various applications SA884M can also extract Alarm conditions from Modbus port & relay them as SMS.

Other Details

• Quick SMS alerts from field inputs
• Combination of 8 Digital and 8 Analog Inputs (4 ~ 20 mA) , upto 4 Digital outputs and RS485 port with Modbus RTU support
• For every input, unique SMS can be sent to 10 numbers
• Digital Outputs to be controlled via SMS
• Buzzer for audible status indication
• Periodic update of Analog input along with engineering unit and Digital inputs status as normal or alarm
• Configuration via preformatted SMS
• Built in RTC  

Remote Monitoring, Remote Diagnostic and Predictive maintenance is the need of the hour. System upkeep time is vastly improved if the key decision makers are immediately alerted on failures occurring in a system. Change in process conditions like increase or drop in Temperature, Pressure, Flow etc or a Solenoid valve / circuit breaker trip or a forced entry in your house can be immediately alerted via SMS/Email SAN designed a GSM/GPRS based embedded Alert system catering to various applications SA MV extracts Alarm conditions from Modbus port & relay them as SMS and Voice. SA ME model supports email for reporting alarms.

It is a 2G/4G based embedded Quick SMS alert System for field inputs with multiple Analog / Digital Input & Digital Output catering to various applications such as, Remote Monitoring, Remote Diagnostic and Predictive maintenance.

It is used for remote monitoring of field equipment via2G/4G network. It provides reliable data connection between central monitoring software and remote field device. It is designed to be used in industrial applications and operates on 18V-36V DC power supply. It can also support industry popular protocols such as MODBUS RTU for capturing data from field equipment and make it available to SCADA systems.