Network Router

GSF Cellular/IoT router device provides data transmission function by public LTE / WCDMA /GPRS / EDGE network It uses Industrial High performance CPU and embedded real time operating system It has 2*RS232, 1*RS232 ( Debug port ) and 1*RS485, 1 * Ethernet, 1* WAN & 1*WiFi ports that can conveniently and transparently connect your existing Serial and Ethernet devices to a cellular network It has been widely used on M2M fields, such as self-service Terminals, Intelligent transportation, Smart Grid, Industrial automation, Telemetry, Finance, POS, Water supply, Environment protection, and so on.

Features

• Designed for Industrial Application
• High-powered industrial cellular module High-powered Industrial CPU

Standard and Convenience 

• Standard RS232 (or RS485/RS422), Ethernet & WiFi port that can connect to Serial, Ethernet & WiFi devices directly. Standard WAN port & PPPoE protocol that can connect to ADSL directly
• Enter into communication state automatically when powered
• Convenient configuration and maintenance interface WEB or CLI 

High-performance

• Double link backup between Primary & Backup SIM and between Cellular and WAN (PPPOE, ADSL) (optional)
• VPN Client and Server (PPTP, L2TP, IPSEC, OPENVPN, GTRE) (only for VPN version)
• Remote management, SYSLOG, SNMP, TELNET, SSHD, HTTPS, etc.
• Full protocol, TCP/IP, UDP, ICMP, HTTP, TELNET, etc. SMTP, POP3, OICQ, FTP is optional. Modbus RTU to Modbus TCP Conversion.
• Multiple DDNS providers
• MAC Address clone, PPPoE Server 
• APN/VPDN
• DHCP server and client, Firewall, NAT, DMZ host, URL block, QoS, Traffic statistics, Real time link speed statistics etc.
• SPI firewall, VPN traversal, access control, URL filtering, etc.
• Multi trigger ways, SMS, ring and data 
• Link disconnection when timeout
• NTP, RTC embedded
• WiFi 802.11 b/g/n, AP Client, Adhoc, Repeater Bridge mode
• WiFi WEP, WPA, WPA2 encryption and MAC address filter
• Schedule Reboot, Schedule Online and Offline, etc.
• Local and remote firmware upgrade, import and export configure file.  

GSF M2M D100 is an IoT Distributed Processing Unit designed for the wireless remote and large data transmission. It provides the powerful processing ability of data from Ethernet, RS232, RS485, WIFI or other different communication interfaces for different SCADA platforms.

Benefits

• Protocols Supported : IEC101, IEC104, Modbus RTU, Modbus TCP DNP3.0 etc. 

• Advanced Failover : Maximizes uptime by seamlessly switching between the multiple Internet interfaces (cellular, WAN, WIFI, Dual-SIM Active/Standby).
• Multiple Tunneling Schemes : Secure your data using a variety of VPN tunneling schemes, including IPSec, L2TP, PPTP, OpenVPN and GRE.
• Ethernet, serial and I/O for connecting diverse field assets.
• Flexible WIFI: 802.11b/g/n(2.4GHz) and 802.11ac(5.8GHz) dual-band WIFI, configurable
• WIFI as WAN or Access point, WIFI Security (WEP / WPA / WPA2 Mixed Mode) and multiple SSID.

• Gigabit Ethernet ports.