San Telequip Private Limited

The SC10MK X E serves as a critical bridge between legacy serial Modbus devices and modern Modbus TCP/IP networks. In an era of increasing connectivity, this converter provides a straightforward solution to make serial equipment "Internet ready," enabling remote software access from anywhere on the network. Its high-end CPU makes it an ideal choice for modernizing systems in applications such as energy meters, solar controls, PLCs, and other industrial instruments.
Functioning as a single-port Modbus RTU/ASCII to Modbus TCP gateway, the SC10MK X E translates between the serial-based Modbus protocols and the Ethernet-based TCP protocol. This allows industrial control systems, SCADA software, and other TCP-based applications to communicate seamlessly with devices that traditionally rely on RS-232, RS-422, or RS-485 connections. The device simplifies network architecture, reduces wiring complexity, and extends the life of valuable serial assets.

The Multi-port Industrial Serial Server SC10EXXAM series is a gateway between ModbusASCII/RTU to ModbusTCP Communications. It allows almost any Modbus RTU device to aLAN network by encapsulating serial data and transporting it over Ethernet. SC10EXXAM SSeries offers full-duplex, bi-directional data transmission between Serial port and Ethernetnetwork. SC10EXXAM S Series supports OpenVPN and IPsec, which allows you to securelycommunicate through the internet.Flexible configuration options enable this unit to be setup by Telnet, Web browser, SerialConsole, or other Windows utilities. Packed in a rugged metal housing with 19-inch Rackmount and AC / DC power input, SC10EXXAM is ideal for almost any industrial andmanufacturing automation.

Features
Modbus is an industry adopted communication protocol based on RTU, ASCII,and TCP protocols for various applications. These three protocols arecommonly used by various equipments in the industry such as DCS, PLC,HMI, Power meters, various Sensor etcSC10E4 M S Modbus Gateway supports 16 simultaneous TCP master and 32 simultaneous requests for each TCPMaster
 RS232/RS485/422, Ethernet and Fiber ( SFP) ports 4 Software-selectable RS232/RS485/RS422 Serial ports, up to 921kbps Each Serial port can be individually configured for Modbus RTU or Modbus ASCII, Masteror Slave or even different Baud rate Conversion of any Modbus protocols between Modbus TCP, Modbus RTU, and ModbusASCII, Virtual Com Port ID routing when a Modbus ID conflict occurs Function Codes supported : 1, 2, 3, 4, 5, 6, 15 & 16 All the 4 Serial ports can use 502 TCP System port Embedded security with PPTP, IPsec or OpenVPN (Client/Server) Supports wide temperature range of -40 to 85°CThere are 2 Ethernet ports and they operates asDual Subnet Mode : Two Ethernet ports have separate IP addresses and subnetsRSTP Redundancy Mode : The system will use only one port for data transfer. If the port isdisconnected, the whole system will change to another port automatically. RSTP can be usedto form a Ring with an existing Network

The Multi-port Industrial Serial Server SC10EXXA Series is a gateway between Ethernet (TCP/IP) and RS232/422/485 communications. It allows almost any serial device to a LAN. network by encapsulating serial data and transporting it over Ethernet. SC10EXXA offers full- duplex, bi-directional data transmission transparent between Serial port and Ethernet network.SC10EXXA S Series supports OpenVPN and IPsec, which allows you to securelycommunicate through the internet.Flexible configuration options enable this unit to be setup by Telnet, Web browser, SerialConsole or Windows utilities. Packed in a rugged metal housing with 19-inch rack mount and 100~240VAC wide power input range, SC10EXXA is ideal for almost any industrial and manufacturing automation.

Modbus is an industry adopted communication protocol based on RTU, ASCII, and TCP protocols for various applications; these three protocols are commonly used by various equipment in the industry, such as DCS, PLC, HMI, power meters, various sensor and measuring instruments.

Highlights

• 8/16-port Secured Modbus TCP Terminal Server
• Each port can be independently configured
• Software selectable RS232/422/485 for each port or Isolated RS232 OR RS485/422 ports Dual 10/100Mbps Ethernet for networking redundancy
• Support TCP Server/Client UDP, Virtual Com multi-link mode and Modbus RTU/TCP 
• Configuration via Serial Console, Telnet, Web Server or Windows-based utilities
• Relay out indicator for Network link-status 
• LCM indication with 4 key pad setting

The Multi-port Industrial Serial Server SC10EXXAM series is a gateway between Modbus ASCII/RTU to Modbus TCP Communications. It allows almost any Modbus RTU device to a LAN network by encapsulating serial data and transporting it over Ethernet. SC10EXXAM S Series offers full-duplex, bi-directional data transmission between Serial port and Ethernet network. SC10EXXAM S Series supports OpenVPN and IPsec, which allows you to securely communicate through the internet. Flexible configuration options enable this unit to be setup by Telnet, Web browser, Serial Console, or other Windows utilities. Packed in a rugged metal housing with 19-inch Rack mount and AC / DC power input, SC10EXXAM is ideal for almost any industrial and manufacturing automation.

Dual Subnet Mode : Subnet is a logically visible subdivision of an IP network. The LAN 1 and LAN2 can be assigned to different subnets. This feature gives the user flexible network manageability. Separate IP’s. Different Class

Redundancy Mode : A goal of redundant topologies is to eliminate network downtime caused by a single point of failure. The LAN1 and LAN2 can be assigned to the same IP network. It will enable the network to recover rapidly from failure and fault so that the failures and faults will be bypassed.