San Telequip Private Limited

Electronic equipment is susceptible to transient disturbances from a variety of sources including ESD to an open connector or Interface, direct or nearby lightning strikes to cables and wires, and charged cables “hot plugged” into I/O ports. SP485 is designed to protect the Serial port from damage which may result from such transient events. The protection includes current limitation, voltage clamping, grounding the lightning and surge arresting using a mix of various protection devices to obtain a well-balanced surge protector. This a good alternative for long cable runs through noisy areas or during lightening & noisy transients.

In modern industrial environments, the integrity of data communication lines is paramount. Safeguarding sensitive electronic equipment from electrical transients is not merely a precaution but a strategic necessity to ensure operational continuity, prevent costly downtime, and protect capital investments. Serial communication interfaces, particularly RS485 ports used in control and automation systems, are especially vulnerable to these disturbances.
The San Telequip SP485-S is an industrial-grade surge protector specifically engineered to shield RS485 serial ports from damaging transient events. It addresses the critical vulnerability of electronic equipment to disturbances originating from Electrostatic Discharge (ESD), nearby lightning strikes, and electrical surges caused by "hot-plugging" charged cables. By isolating the serial interface from these high-energy events, the SP485-S preserves the integrity of connected devices.
The device achieves this robust protection through a multi-stage defense mechanism that combines current limitation, aggressive voltage clamping, and surge arresting. By grounding and dissipating harmful electrical energy before it can reach the serial port, the SP485-S provides a reliable safeguard. Its design makes it an ideal solution for systems with long cable runs that pass through electrically noisy environments, where the risk of induced transients is significantly higher.

SP PR10G is a PoE surge protector, with 1 input port and 1 output port, support 8 lines network signals and PoE Surge protection. It is designed to handle differential mode surge voltage (8/20us) 4KV and Common mode surge voltage (8/20us) 6KV, and  support 100/1000Mbps. It is compliant with IEEE802.3af/at/PoE++ standard and protects PoE switch and Midspan devices effectively against surge damage. SP PoE PR10G is designed for indoor use.