Send SMS
Send E-mail

Industrial Grade Terminal Server

SAN offers a full line of Industrial Grade Terminal Server, allowing access of Serial (remote) devices like Access Controllers, Fire Alarm panels, Industrial Automation products etc to be connected on LAN or to allow Ethernet connectivity to your legacy serial device.
Get CALLBACK

Industrial 4-port Isolated RS422/485 to 2-port 10/100Base-TX Device Server

Industrial 4-port Isolated RS422/485 to 2-port 10/100Base-TX Device Server
 
Ask For Price
Product Price:  Get Latest Price

Product Details:
BrandSan Telequip
Mean Time Before Failure188251 hours / 21.5 years
Watch Dog Timer20 sec Software Auto Reset
LCD Type2 Line, 22 characters , 4 Keys
Operating SystemWin7, Win8, Win2008 Server, Win2012 Server
Operation ModeRS422 / RS485, DIP Switch selectable
Serial Baud Rate300 bps to 115.2 Kbps
ModelSC10E4IG-L
Redundant Input PowerDual DC inputs, 12-48VDC on 6-pin terminal block

SC10E4IG-L series Device servers can conveniently and transparently connect up to four Serial ports to an Ethernet network. Data transmission between the Serial and Ethernet interfaces is bi-directional. You can both centralize the management of your Serial devices, and distribute management hosts over the network. SC10E4IG-L series Device servers can be used to connect different devices for remote data polling or event handling over a TCP/IP network. Each Serial port can operate independently to provide maximum versatility. For example, port 1 can operate in Driver mode, port 2 in TCP Server mode, and ports 3 and 4 in TCP Client mode etc.

Technical Details:
Storage Temperature-40 to +85 Degrees C
Operating Temperature-10 to +60 Degrees C
Humidity5 to 95 % RH (non condensing)
Dimensions40.5 x 143 x 210 mm (with LCD), 52 x 104 x 136 mm (without LCD)
Weight600 gm
MountingDIN rail
Enclosure ProtectionIP-30

Additional Information:
  • Item Code: SC10E4IGL
Yes! I am Interested
View PDF
Get CALLBACK

Industrial Grade 4-port RS232/422/485 to 2-port 10/100Base-TX Device Servers

Industrial Grade 4-port RS232/422/485 to 2-port 10/100Base-TX Device Servers
 
Ask For Price
Product Price:  Get Latest Price

Product Details:
Model NumberSC10E4NI
BrandSan Telequip
Operation ModeRS232/RS422/RS485 (Software configurable)
Serial ConnectorsDB9 x 4
Serial Port Baud Rate110 bps to 460.8 Kbps
ESD Protection15 KV
Surge Protection600 W
Redundant Power Inputs12 to 48 VDC on terminal block
Recovery TimeLess than 10 ms
EnclosureIP-30
Redundant Input PowerDual DC inputs, 12-48VDC on 6-pin terminal block
Power Consumption5.5 Watt

This is a 4 port RS232/422/485 to 2 ports LAN redundant device server. To assure the agility and security of critical data, it offers many powerful features for HW & SW redundant functions. When the connection between master-link and LAN fails, it can automatically switch to another LAN port within 10mS, and still guarantees a non-stop connection. It also supports Switch mode, users can use Daisy Chain to reduce the usage of Ethernet switch ports. It can simultaneously transfer data into 5 host PCs. This feature can assure all critical data that saved in different host PC to avoid Ethernet break or host PCs failure.

Technical Details:
Operating Temperature-10 to +60 Degrees C
Storage Temperature-40 to +85 Degrees C
Humidity5 to 95 % RH (non condensing)
Dimensions52 x 106.1 x 144.3 mm
Weight678 gm
EnclosureIP-30
Yes! I am Interested
View PDF
Get CALLBACK

8 Port Isolated Serial Device Server

8 Port Isolated Serial Device Server
 
Ask For Price
Product Price:  Get Latest Price

Product Details:
BrandSan Telequip
Voltage SupplyUniversal AC/DC, Can connect 48 VDC or 110/220 VAC
ModelSC10E08G I
TCP ServerMin 4 connections or Virtual Com mode
TCP ClientUp to 16 destinations
UDPMin 8 destinations
Serial Baud Rate300 bps to 115.2 Kbps
Number Of Serial Ports8 in Rear
Fiber Connector TypeSFP
Number of Optical Ports1
Fiber Interface Speed100 Mbps
Number Of Ethernet Ports4
Ethernet Speed10/100 Mbps, Auto MDI/MDIX
Ethernet ModeSwitch Mode
Power Consumption5 W

This device supports RS 232 / RS 485 ( 2 wire)

SC10E08G series Serial device servers can connect up to 8-port serial devices to an Ethernet network. It provides Optical isolation for the serial ports. The SC10E08G series device servers are ultra-lean, ruggedized, and user-friendly, making simple and reliable serial to Ethernet solutions possible.

Features:
  • Web-based configuration
  • 2 KV isolation for serial signals
  • Built-in 15 KV ESD protection for all serial signals
  • Standard 19-inch rack mount or desktop mount size
  • 3 Port Auto-detecting 10/100Mbps Ethernet(UTP)+Fiber Port(SFP)
  • Support TCP server/ TCP client/UDP/Virtual COM Socket modes

 

Technical Details:

Operating Temperature0 to 50 Degrees C
Storage Temperature-40 to +85 Degrees C
Dimensions430 x 145 x 45 mm
Weight1.5 kg
Mounting19" 1U Rack mounted or Desktop

Additional Information:
  • Item Code: SC10E08G_I
  • Production Capacity: SC10E08G-I
Yes! I am Interested
View PDF
Get CALLBACK

16 Port Serial Device Servers

16 Port Serial Device Servers
 
Ask For Price
Product Price:  Get Latest Price

Product Details:
BrandSan Telequip
Input Voltage230VAC Range 100 to 240V AC, 48V DC Range: 36-75V DC
CPU32-bit Up to 400MHz ARM Thumb Processor with MMU
Flash2GB NAND Flash
RAM64M Bytes DDRII Synchronous DRAM
WatchdogHardware built-in
TCP ServerUp to 4 connections
TCP ClientUp to 4 Destinations
UDPUp to 4 destinations
ModelSC10E16G
Magnetic Isolation Protection1.5 KV built-in
Number of Ethernet Ports2
Power ConsumptionApprox 15 W

This device supports RS 232 / RS 485 / RS 422

The SC10E016G Serial device server can connect 16 Serial devices to an Ethernet network, It supports RS232/RS485/RS422 Serial standards, It can be widely applied in different fields for such as PLCs, sensors and control console. These Device servers are ultra-lean, ruggedized, and user-friendly, making simple and reliable serial to Ethernet solutions possible.

Technical Details:
Operating Temperature0 to 50 Degrees C
Storage Temperature-40 to +85 Degrees C
Humidity5 to 95 % RH (non condensing)
Dimensions430 x 200 x 44.5 mm
Weight2.6 Kg

Additional Information:
  • Item Code: SC10E16G
Yes! I am Interested
View PDF
Get CALLBACK

32 Port Serial Device Servers

32 Port Serial Device Servers
 
Ask For Price
Product Price:  Get Latest Price

Product Details:
BrandSan Telequip
ModelSC10E32G
Operation ModesTCP Server, TCP Client, UDP, Virtual Com
Number of Ports32
CPU32-bit Up to 400MHz ARM Thumb Processor with MMU
Number Of Ethernet Ports2
Flash2GB NAND Flash
RAM64M Bytes DDRII Synchronous DRAM
WatchdogHardware built-in
Ethernet Speed10/100/1000 Mbps, Auto MDI/MDIX
Ethernet Connector8-pin RJ45
Magnetic Isolation Protection1.5 KV built-in. EN 61000-4-5 (Surge) Level 2
TCP ServerUp to 4 connections
TCP ClientUp to 4 Destinations
UDPUp to 4 Destinations
Power ConsumptionApprox 15 W
Input Voltage230VAC / 48V DC, Redundant (AC / DC mix is also possible)

This device supports RS 232 / RS 485 / RS 422

The SC10E032G Serial device server can connect 32 Serial devices to an Ethernet network, It supports RS232 serial standards, It can be widely applied in different fields for such as PLCs, sensors and control console. These Device servers are ultra-lean, ruggedized, and user-friendly, making simple and reliable serial to Ethernet solutions possible.

Features
  • Web-based configuration
  • Standard 19-inch Rackmount size
  • Auto-detecting 10/100Mbps Ethernet
  • Built-in 15 KV ESD protection for all serial signals
  • Support TCP server/ TCP client/UDP/Virtual COM Socket modes
  • Wide input voltage range
  • Optional Support 2 of 1000M SFP Fiber port, Mini SD back up for Serial ports, USB 2.0 for 3G

Technical Details

Operating Temperature0 to 50 Degrees C
Storage Temperature-40 to +85 Degrees C
Humidity5 to 95 % RH (non condensing)
Dimensions430 x 200 x 78 mm
Weight3.1 kg

Additional Information:
  • Item Code: SC10E32G
Yes! I am Interested
View PDF
Get CALLBACK

32 Port Isolated Terminal Servers

32 Port Isolated Terminal Servers
 
Ask For Price
Product Price:  Get Latest Price

Product Details:
BrandSan Telequip
Power ConsumptionLess than 5 W
Input VoltageUniversal AC/DC. Can connect 48VDC or 110/220VAC
ModelSC10E32G I
Number Of Ethernet Ports2
TCP ServerMin 4 connections or Virtual Com mode
TCP ClientUp to 16 destinations
UDPMin 8 destinations
Network ProtocolsICMP, IP, TCP, UDP, HTTP, ARP
Windows Virtual COM DriversWindows 2000/XP/2003/Vista/2008/7/8
Ethernet Speed10/100 Mbps, Auto MDI/MDIX
ModeSwitch mode

This device supports RS 232 / RS 485 ( 2 wire)

The SC10E32G I Terminal Servers can connect 32 Serial devices to an Ethernet network. It provides Optical isolation for the serial ports. These Device servers are ultra-lean, ruggedness, and user-friendly, making simple and reliable serial to Ethernet solutions possible.

Features
  • Web-based configuration
  • 2 KV Isolation for Serial signals
  • Built-in 15 KV ESD protection for all Serial signals
  • Standard 19-inch Rack-mount size
  • 2 Port Auto-detecting 10/100Mbps Ethernet
  • Support TCP server / TCP client / UDP / Virtual COM Socket modes

Technical Details

Operating Temperature0 to 50 Degrees C
Storage Temperature-40 to +85 Degrees C
Humidity5 to 95 % RH (non condensing)
Dimensions430 x 200 x 45 mm
Weight3.25 Kg

Additional Information:
  • Item Code: SC10E32GI
Yes! I am Interested
View PDF
Get CALLBACK

48 Port Serial Device Server

48 Port Serial Device Server
 
Ask For Price
Product Price:  Get Latest Price

Product Details:
BrandSan Telequip
Power ConsumptionApprox 15 W
Input Voltage230VAC / 48V DC, Redundant. AC / DC mix is also possible
Operation ModesTCP Server, TCP Client, UDP
Network ProtocolsICMP, IP, TCP, UDP, HTTP, ARP
SD InterfaceMini SD
ModelSC10E48G
CPU32-bit Up to 400MHz ARM Thumb Processor with MMU
Flash2GB NAND Flash
RAM64M Bytes DDRII Synchronous DRAM
WatchdogHardware built-in

This device supports only RS 232

The SC10E48G Serial device servers can connect 48-port serial devices to an Ethernet network, It supports RS232 serial standards, It can be widely applied in different fields for such as PLCs, sensors and control console. These device servers are ultra-lean, ruggedized, and user-friendly, making simple and reliable serial to Ethernet solutions possible.

Features:
  • Web-based configuration
  • Standard 19-inch Rackmount size
  • Auto-detecting 10/100Mbps Ethernet
  • Built-in 15 KV ESD protection for all serial signals
  • Support TCP server/ TCP client/UDP/Virtual COM Socket modes
  • Wide input voltage range
  • Optional Support: 2 of 1000M SFP Fiber port, Mini SD back up for Serial ports, USB 2.0 for 3G

 

Technical Details:

Operating Temperature0 to 50 Degrees C
Storage Temperature-40 to +85 Degrees C
Humidity5 to 95 % RH (non condensing)
Dimensions430 x 200 x 78 mm
Weight3.4 kg
HousingMetal

Additional Information:
  • Item Code: SC10E48G
Yes! I am Interested
View PDF
Explore More Products
X
Find Us Machindra Phale (Senior Executive) Deron Heights, 5th Floor, Office No. 504 & 505, Survey No. 270/1/23 Baner Road, Pune - 411045, Maharashtra, India
SEND SMS
SEND E-MAIL
Share Us: