San Telequip Private Limited

Model SC09 provides a cost effective plug-and-play solution for long-range 10Base-T or 100Base-TX Ethernet extensions. It has an added benefit of 10/100 Auto-negotiation, making it the perfect choice when planning future upgrades of 10Base-T networks. Built-in auto-sensing capabilities enable full or half-duplex Ethernet operation with no configuration required.
1. MDI/MDI-X, 10M/100M Auto negotiation
2. Supports full-duplex / half–duplex, Point-to-point transfer
3. Link Fault Pass Through (LFPT) 


Standard : IEEE802.3 10Base-T, IEEE 802.3u 100BaseT(X) and 100Base-FX IEEE802.3x Full Duplex and Flow Control
RJ45 port rate : 10/100Mbps Auto negotiation, Forced 10 or 100 through DIP on board Ethernet transmission : 100m distance
RJ45 port connector : RJ45
Isolation : Magnetic, 1.5KV

Industrial grade UnManaged POE Ethernet Switch are ideal solution for powering remote devices such as IP phones, video cameras, wireless access points, etc.

4 x 10/100Base-TX Port to 2 x 100X SFP Slots.
This are IEEE 802.3af/at Compliant switches. The operating temperature range is from -40 to 85 DegC and together with EMC compatibility, it makes the switch works stable under poor environment which provides safe and reliable solution for all industrial automation needs.

IESMGR 3000-4S A75R Series Managed Rack mount switch will provide you the flexibility for your application needs. You will be able to choose among Giga Copper, Giga SFP (1G) & PoE Modules and customize 8 Port combinations your device, in a very simple way. It is available in Redundant AC, DC & mix of AC/DC power input variants. IESMGR 3000-4S+ A75R Series is designed to withstand the harshest environments. Its fanless design and EMC Level 3 protection guarantee reliable operations within -40 and +75°C. It provides network redundant self-recovery mechanism is less than 20ms on full load that enables the user to build a reliable network through almost any redundant ring topology. With a Multifunctional web dashboard, its offers intelligent features such as Quality of service (QoS), IGMP, Port mirroring and security.  (Modules Prices will be Extra depending on Selected Modules)

IESMGR 3000-4S+ A75R Series Managed Rack mount switch will provide you the flexibility for your application needs. You will be able to choose among Giga Copper, Giga SFP (10G) & PoE Modules and customize 8 Port combinations your device, in a very simple way. It is available in Redundant AC, DC & mix of AC/DC power input variants. IESMGR 3000-4S+ A75R Series is designed to withstand the harshest environments. Its fanless design and EMC Level 3 protection guarantee reliable operations within -40 and +75°C. It provides network redundant self-recovery mechanism is less than 20ms on full load that enables the user to build a reliable network through almost any redundant ring topology. With a Multifunctional web dashboard, its offers intelligent features such as Quality of service (QoS), IGMP, Port mirroring and security.  (Modules Prices will be Extra depending on Selected Modules)

The San Telequip IPS S 1050 is an unmanaged Power over Ethernet (PoE) switch purpose-built for industrial applications. Its design philosophy centers on delivering reliable network connectivity in demanding environments where standard commercial networking hardware would fail. Housed in a compact, standard metal shell, the IPS S 1050 is engineered for resilience, durability, and straightforward installation in space-constrained industrial settings.
This switch provides seamless integration into existing industrial networks by adhering to key IEEE standards, including IEEE 802.3 10Base-T and IEEE 8.3u 100Base-TX for Fast Ethernet communications. Its core capability lies in its implementation of Power over Ethernet, complying with IEEE 802.3af/at standards. This allows the switch to not only transmit data but also deliver electrical power over a single Ethernet cable, simplifying the deployment of network devices such as IP cameras, wireless access points, and VoIP phones in locations where power outlets are scarce or impractical.

"The IESR S 10XX series is a family of unmanaged industrial Ethernet switches designed to provide a stable and secure networking backbone for critical infrastructure. These switches are built to withstand the rigors of industrial settings, ensuring consistent data transmission where standard commercial-grade hardware would fail.
With a focus on durability and performance, the series is an ideal solution for a range of applications, including industrial automation, intelligent transportation systems (ITS), and high-demand video transmission. Its core value proposition is the delivery of a safe and reliable networking solution, achieved through a design that features an extended operating temperature range of -40°C to 85°C and excellent electromagnetic compatibility (EMC). This ensures uninterrupted operation in facilities with significant electrical noise and extreme temperature fluctuations"

The IESMG 308-6S A series utilizes a Store-and-Forward switching architecture within a fan-less, energy-saving design, ensuring reliable and stable operation. This construction, housed in a rugged aluminum enclosure, makes it inherently suited for deployment in harsh industrial settings where dust, vibration, and temperature extremes are common.
Operational resilience is a cornerstone of the series. The switches are designed to function flawlessly across a wide temperature range of -40⁰C to +85⁰C and are equipped with dual redundant power inputs to guarantee continuous operation in the event of a primary power source failure. This robust design ensures high availability for connected end devices like VoIP phones, video cameras, and industrial sensors.

The IESMG 308-6S A series utilizes a Store-and-Forward switching architecture within a fan-less, energy-saving design, ensuring reliable and stable operation. This construction, housed in a rugged aluminum enclosure, makes it inherently suited for deployment in harsh industrial settings where dust, vibration, and temperature extremes are common.
Operational resilience is a cornerstone of the series. The switches are designed to function flawlessly across a wide temperature range of -40⁰C to +85⁰C and are equipped with dual redundant power inputs to guarantee continuous operation in the event of a primary power source failure. This robust design ensures high availability for connected end devices like VoIP phones, video cameras, and industrial sensors.

In modern network architecture, media converters serve the critical function of bridging distinct physical media, most commonly connecting legacy copper-based Ethernet infrastructure with high-speed, long-distance fiber optic cabling. This capability is essential for extending network reach beyond the inherent 100-meter limitation of standard Ethernet, enabling robust connectivity across large campuses, industrial facilities, and geographically dispersed sites.
The San Telequip SC09FEN is engineered as a cost-effective, plug-and-play solution designed specifically for this purpose. Its core value proposition lies in its ability to seamlessly extend 10/100 Mbps Ethernet networks over fiber with minimal administrative overhead. The device is forward-compatible, supporting both 10Base-T and 100Base-TX standards, which allows organizations to deploy it in existing 10 Mbps networks with the assurance that it will support future upgrades to 100 Mbps. This flexibility is powered by a zero-configuration design; built-in 10/100 auto-negotiation and full/half-duplex auto-sensing capabilities allow the converter to automatically adapt to the connected equipment without requiring manual setup.

Built on a high-performance Store-and-Forward architecture, this series offers significant port density with models providing up to 12 copper and 12 SFP ports in a single unit. This high port count makes it an excellent choice for larger-scale deployments in factory floors, transportation systems, and utility substations where numerous sensors, controllers, and cameras must be reliably connected to the network. 
Mirroring the portfolio's commitment to durability, the IESMG 3012-4S A series is engineered for harsh environments. Its fan-less, energy-saving design is housed in a rugged IP40 enclosure, and it supports an extensive operating temperature range. Combined with dual redundant power inputs, these features make it a highly reliable core or aggregation switch capable of providing stable, long-term performance in demanding industrial settings. 

CERTIFICATION
MTCTE CERTIFIED

The SC09FENG model is engineered as a cost-effective, plug-and-play solution for extending Giga Ethernet network connections far beyond the standard limitations of copper cabling. By converting electrical Ethernet signals to optical signals, it facilitates reliable, high-speed data transmission over extensive distances. This capability makes it a perfect choice for network administrators planning future upgrades, as it seamlessly integrates modern fiber optic technology into existing infrastructure.
With built-in auto-sensing capabilities, the device automatically negotiates network speeds and duplex modes, eliminating the need for complex manual configuration. This ensures a straightforward, hassle-free installation process, allowing for rapid deployment in a wide range of environments. The following sections will explore the specific functionalities and technical parameters that define this versatile media converter.

High-performance, hot-pluggable SFP transceivers supporting 155 Mbps over single-mode fiber up to 120 km. Features duplex LC connector, 1310 nm FP laser, and metal casing for EMI protection. RoHS compliant and SFP MSA certified. Ideal for data centers, telecom, and long-distance fiber networks. Includes digital monitoring (DDMI) for temperature, voltage, and Tx/Rx power. Operates in commercial (0–70°C) and industrial (-40–85°C) environments.

The SFPG+ 10G SFP Module from San Telequip Private Limited is a high-performance transceiver supporting 10Gbps data rate and 20 km transmission over single-mode fiber. Ideal for 10G Ethernet, 10G Fiber Channel, and industrial networking, it features hot-pluggable design, DDMI monitoring, and industrial temperature support (-40°C to 85°C).

Key Features:

• Hot-pluggable SFP+ module
• 1310 nm DFB laser with PIN photodiode
• Data rate up to 10.7 Gbps
• Duplex LC fiber interface
• Real-time digital diagnostics (DDMI)
• RoHS compliant

Applications: 10G Ethernet, 10G Fiber Channel, Industrial Networking

The San Telequip GS81-USB is a robust and versatile cellular connectivity solution engineered for demanding industrial applications. Specifically configured for the Indian market, this modem provides a reliable communication bridge for systems requiring remote data access, monitoring, and control. Its combination of industrial-grade features, broad protocol support, and straightforward integration makes it a compelling choice for system integrators and engineers.The GS81-USB is a plug-and-play 4G modem designed to deliver reliable cellular data communication through a standard USB interface. Its core function is to provide a seamless link to modern cellular networks, supporting a wide array of technologies including LTE FDD/TDD, WCDMA, and GSM. This multi-band capability ensures consistent connectivity across various network environments within India.
The modem's versatility is further enhanced by its comprehensive support for a range of communication protocols. It features an embedded TCP/UDP stack, a PPP stack, and support for FTP/HTTP, enabling flexible integration with both legacy and modern IP-based systems. This broad compatibility, combined with its simple USB interface, makes the GS81-USB highly suitable for integration into industrial controllers, data loggers, and other remote assets that require dependable and persistent data communication.
Technically, the device is controlled via standard AT commands (compliant with GSM 07.07 and 07.05), providing a familiar and powerful interface for developers. It supports GPRS multi-slot Class 12/10/8 and conforms to GSM phase 2/2+ standards, ensuring compatibility and reliable performance on 2G networks as a fallback.